Pontiac Vehicle Models Pontiac Vibe 2008-2010
Pontiac Vehicle Models Pontiac Vibe 2008-2010 Torque Specifications
Complete Pontiac Vehicle Models Pontiac Vibe 2008-2010 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
1.8l I4 Engine
Torque specifications for 1.8L-I4 Engine
1.8l I4 Engine
Torque specifications for 1.8L-I4 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure the cylinder head to the engine block.
2 Cylinder Head to Engine Block Studs
M14 x 1.5
2
Cylinder Head to Engine Block Studs
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value. Secure the cylinder head to the engine block.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Secure the main bearings to the engine block.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
110 ft-lbs (150 N·m)
Important Notes
Secure the crankshaft pulley or harmonic balancer to the crankshaft.
Valvetrain and Timing System
1 Valve Cover Bolts
M10 x 1.5
1
Valve Cover Bolts
M10 x 1.5
Torque Specification
69 inch-lbs (8 N·m)
Important Notes
Secure the valve cover to the cylinder head.
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure the timing belt or chain tensioner to the engine block.
Engine Mounts and Transmission
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value. Secure the engine to the engine mounts.
2 Engine Block to Transmission Bellhousing Bolts
M16 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M16 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value. Secure the engine block to the transmission bellhousing.
Intake and Exhaust Systems
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Secure the intake manifold to the engine block.
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Secure the exhaust manifold or headers to the engine block.
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
89 inch-lbs (10 N·m)
Important Notes
Secure the water pump to the engine block.
2 Thermostat Housing Bolts
M10 x 1.5
2
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
89 inch-lbs (10 N·m)
Important Notes
Secure the thermostat housing to the engine block.
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the cylinder head to the engine block, ensuring proper sealing and preventing coolant and oil leaks.
2 Cylinder Head to Engine Block Studs
M14 x 1.5
2
Cylinder Head to Engine Block Studs
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
These studs secure the cylinder head to the engine block, ensuring proper sealing and preventing coolant and oil leaks. (Estimated value)
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
These bolts hold the main bearings in place, supporting the crankshaft and ensuring proper engine operation.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
110 ft-lbs (150 N·m)
Important Notes
This bolt secures the crankshaft pulley or harmonic balancer, ensuring proper engine rotation and vibration reduction.
Connecting Rods and Pistons
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
These nuts secure the connecting rods to the crankshaft, maintaining proper piston movement and engine balance.
Flywheel and Transmission
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
These bolts attach the flywheel to the crankshaft, ensuring proper engine rotation and transmission engagement.
2 Engine Block to Transmission Bellhousing Bolts
M12 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
These bolts secure the engine block to the transmission bellhousing, ensuring proper engine and transmission alignment. (Estimated value)
Valvetrain and Timing System
1 Valve Cover Bolts
M10 x 1.5
1
Valve Cover Bolts
M10 x 1.5
Torque Specification
69 ft-lbs (8 N·m)
Important Notes
These bolts hold the valve cover in place, sealing the engine's valve train and preventing oil leaks.
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
This bolt secures the timing belt or chain tensioner, ensuring proper engine timing and preventing damage to the engine.
3 Camshaft Sprocket Bolt
M14 x 1.5
3
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
This bolt attaches the camshaft sprocket to the camshaft, maintaining proper engine timing and valve operation.
4 Timing Belt/Chain Guide Rail Bolts
M10 x 1.5
4
Timing Belt/Chain Guide Rail Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
These bolts secure the timing belt or chain guide rail to the engine block, ensuring proper engine timing and preventing damage to the engine. (Estimated value)
Intake and Exhaust System
1 Intake Manifold Bolts
M12 x 1.5
1
Intake Manifold Bolts
M12 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
These bolts attach the intake manifold to the engine block, ensuring proper airflow and engine performance.
2 Exhaust Manifold/Headers Bolts
M14 x 1.5
2
Exhaust Manifold/Headers Bolts
M14 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
These bolts secure the exhaust manifold or headers to the engine block, ensuring proper exhaust gas flow and engine performance.
3 EGR Valve Bolts
M10 x 1.5
3
EGR Valve Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
These bolts attach the EGR valve to the engine block, ensuring proper exhaust gas recirculation and emissions control.
Fuel System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
89 in-lbs (10 N·m)
Important Notes
These bolts secure the fuel rail to the engine block, ensuring proper fuel delivery and engine performance.
2 Fuel Injector Bolts
M10 x 1.5
2
Fuel Injector Bolts
M10 x 1.5
Torque Specification
89 in-lbs (10 N·m)
Important Notes
These bolts attach the fuel injectors to the engine block, ensuring proper fuel delivery and engine performance.
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
These bolts secure the spark plugs to the engine block, ensuring proper ignition and engine performance.
2 Ignition Coil Bolt
M10 x 1.5
2
Ignition Coil Bolt
M10 x 1.5
Torque Specification
71 in-lbs (8 N·m)
Important Notes
This bolt secures the ignition coil to the engine block, ensuring proper ignition and engine performance.
Engine Mounts and Accessories
1 Engine Mounting Bolts
M12 x 1.5
1
Engine Mounting Bolts
M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
These bolts secure the engine to the engine mounts, ensuring proper engine stability and vibration reduction. (Estimated value)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
71 in-lbs (8 N·m)
Important Notes
These bolts secure the oil pan to the engine block, preventing oil leaks and ensuring proper engine lubrication.
3 Water Pump Bolts
M10 x 1.5
3
Water Pump Bolts
M10 x 1.5
Torque Specification
89 in-lbs (10 N·m)
Important Notes
These bolts secure the water pump to the engine block, ensuring proper engine cooling and performance.
4 Thermostat Housing Bolts
M10 x 1.5
4
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
89 in-lbs (10 N·m)
Important Notes
These bolts attach the thermostat housing to the engine block, ensuring proper engine cooling and performance.
5 Oil Filter Housing Bolt
M12 x 1.5
5
Oil Filter Housing Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
This bolt secures the oil filter housing to the engine block, ensuring proper engine lubrication and performance.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension Mounting
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
148 ft-lbs (200 N·m)
Important Notes
Proper torque is crucial to maintain the vehicle's ride height and prevent damage to the suspension components.
2 Control Arm Bolts
M12 x 1.25
2
Control Arm Bolts
M12 x 1.25
Torque Specification
111 ft-lbs (150 N·m)
Important Notes
Proper torque ensures the control arms remain securely in place, maintaining proper suspension geometry and preventing damage to the surrounding components.
Steering Components
1 Ball Joint Nut
M16 x 1.5
1
Ball Joint Nut
M16 x 1.5
Torque Specification
46 ft-lbs (63 N·m)
Important Notes
Proper torque is essential to prevent the ball joint from coming loose, which could lead to uneven tire wear and compromised suspension performance.
2 Tie Rod End Nut
M14 x 1.25
2
Tie Rod End Nut
M14 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Proper torque ensures the tie rod end remains securely in place, preventing damage to the surrounding components.
3 Steering Gear/Rack Bolts
M12 x 1.25
3
Steering Gear/Rack Bolts
M12 x 1.25
Torque Specification
133 ft-lbs (180 N·m)
Important Notes
Proper torque ensures the steering gear/rack remains securely in place, maintaining proper steering alignment and preventing damage to the surrounding components.
Sway Bar Components
1 Sway Bar Link Nut
M14 x 1.5
1
Sway Bar Link Nut
M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Proper torque ensures the sway bar link remains securely in place, preventing damage to the surrounding components.
Body Mounting
1 Body Mounting Bolts
M12 x 1.25
1
Body Mounting Bolts
M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque is essential to maintain the vehicle's structural integrity and prevent damage to the surrounding components.
Door and Hood Mounting
1 Door Hinge Bolts
M10 x 1.25
1
Door Hinge Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Proper torque ensures the doors remain securely in place, preventing damage to the surrounding components.
2 Hood Hinge Bolts
M10 x 1.25
2
Hood Hinge Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Proper torque ensures the hood remains securely in place, preventing damage to the surrounding components.
3 Trunk Lid Hinge Bolts
M10 x 1.25
3
Trunk Lid Hinge Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Proper torque ensures the trunk lid remains securely in place, preventing damage to the surrounding components.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper and Mounting
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Brake Disc/Drum and Wheel
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
2 Wheel Lug Nuts
M12 x 1.5
2
Wheel Lug Nuts
M12 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Proper torque of the wheel lug nuts is crucial for maintaining even brake rotor or drum wear and preventing wheel damage.
Master Cylinder and ABS Sensor
1 Master Cylinder Mounting Bolts
M10 x 1.25
1
Master Cylinder Mounting Bolts
M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for the correct torque values.
2 ABS Sensor Mounting Bolts
M6 x 1.0
2
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for the correct torque values.
Brake Rotor and Drum Mounting
1 Brake Rotor Mounting Bolts
M12 x 1.5
1
Brake Rotor Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for the correct torque values.
2 Brake Drum Mounting Bolts
M12 x 1.5
2
Brake Drum Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for the correct torque values.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Proper torque ensures the flywheel is properly seated and aligned.
2 Main Bearing Bolts
M14 x 1.5
2
Main Bearing Bolts
M14 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Proper torque ensures the bearings are properly seated and aligned.
3 Connecting Rod Nuts
M10 x 1.5
3
Connecting Rod Nuts
M10 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Proper torque ensures the rods are properly seated and aligned.
4 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
4
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
110 ft-lbs (150 N·m)
Important Notes
Proper torque ensures the pulley/balancer is properly seated and aligned.
Transmission
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
39 ft-lbs (53 N·m)
Important Notes
Proper torque ensures the transmission is properly aligned and supported.
2 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures the engine and transmission are properly aligned and supported.
3 Transfer Case to Transmission Bolts
M14 x 1.5
3
Transfer Case to Transmission Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures the transfer case is properly aligned and supported.
Drivetrain
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
1
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Proper torque ensures the axles are properly seated and aligned.
2 CV Joint/Axle Nut
M18 x 1.5
2
CV Joint/Axle Nut
M18 x 1.5
Torque Specification
159 ft-lbs (215 N·m)
Important Notes
Proper torque ensures the joint is properly seated and aligned.
3 Propeller/Drive Shaft Bolts
M14 x 1.5
3
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Proper torque ensures the shaft is properly seated and aligned.
4 Differential Cover Bolts
M12 x 1.5
4
Differential Cover Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque ensures the cover is properly seated and sealed.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Ignition System
1 Ignition Coil Bolt
M6 x 1.0
1
Ignition Coil Bolt
M6 x 1.0
Torque Specification
5.92 ft-lbs (8 N·m)
Important Notes
Ensure the ignition coil is properly seated before torquing.
Starting System
1 Starter Motor Mounting Bolts
M10 x 1.5
1
Starter Motor Mounting Bolts
M10 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel before torquing.
Charging System
1 Alternator Mounting Bolts
M10 x 1.5
1
Alternator Mounting Bolts
M10 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure the alternator is properly aligned with the drive belt before torquing.
Battery System
1 Battery Terminal Nuts
M6 x 1.0
1
Battery Terminal Nuts
M6 x 1.0
Torque Specification
5.17 ft-lbs (7 N·m)
Important Notes
Ensure the battery terminals are clean and free of corrosion before torquing.
Grounding System
1 Ground Strap Bolts
M6 x 1.0
1
Ground Strap Bolts
M6 x 1.0
Torque Specification
7.38 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar grounding components. Ensure the grounding point is clean and free of corrosion before torquing.
Fuse Box
1 Fuse Box Mounting Bolts
M6 x 1.0
1
Fuse Box Mounting Bolts
M6 x 1.0
Torque Specification
7.38 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar electrical components. Ensure the fuse box is properly aligned before torquing.
Engine Control Module
1 ECM Mounting Bolts
M6 x 1.0
1
ECM Mounting Bolts
M6 x 1.0
Torque Specification
7.38 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar electrical components. Ensure the ECM is properly aligned before torquing.
Wiring Harness
1 Wiring Harness Clamp Bolts
M6 x 1.0
1
Wiring Harness Clamp Bolts
M6 x 1.0
Torque Specification
5.92 ft-lbs (8 N·m)
Important Notes
Estimated value based on similar electrical components. Ensure the wiring harness is properly routed before torquing.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
1 Oxygen Sensor Bolts
M12 x 1.5
1
Oxygen Sensor Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's recommendations for correct torque value.
2 Heated Oxygen Sensor (HO2S) Bolts
M12 x 1.5
2
Heated Oxygen Sensor (HO2S) Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's recommendations for correct torque value.
3 NOx Sensor Bolts
M12 x 1.5
3
NOx Sensor Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's recommendations for correct torque value.
4 EGR Valve Bolts
M10 x 1.25
4
EGR Valve Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the EGR valve operates correctly and maintains a seal.
Exhaust System
1 Exhaust Manifold/Headers Bolts
M14 x 1.5
1
Exhaust Manifold/Headers Bolts
M14 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Proper torque ensures a leak-free seal and accurate oxygen sensor readings.
2 Catalytic Converter to Exhaust Pipe Bolts
M14 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M14 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Proper torque ensures a leak-free seal and optimal converter performance.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold
1 Exhaust Manifold/Headers to Engine Block Bolts
M12 x 1.5
1
Exhaust Manifold/Headers to Engine Block Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Exhaust Pipe
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
2 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
3 Muffler to Exhaust Pipe Bolts
M12 x 1.5
3
Muffler to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Exhaust System Mounting
1 Exhaust System Mounting Bolts
M14 x 1.75
1
Exhaust System Mounting Bolts
M14 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for specific torque values.
Oxygen Sensor
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for specific torque values.
Heat Shield
1 Heat Shield Bolts
M6 x 1.0
1
Heat Shield Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's instructions for specific torque values.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel System Mounting Components
1 Fuel Pump Mounting Bolts
M12 x 1.5
1
Fuel Pump Mounting Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Proper torque is essential to ensure fuel pump security and prevent damage.
2 Fuel Tank Strap Bolts
M14 x 2.0
2
Fuel Tank Strap Bolts
M14 x 2.0
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Proper torque ensures the fuel tank is securely supported and prevents damage.
3 Fuel Pressure Regulator Mounting Bolts (Estimated)
M10 x 1.25
3
Fuel Pressure Regulator Mounting Bolts (Estimated)
M10 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated torque value, may vary depending on manufacturer's recommendations.
Fuel Rail And Injector Components
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Proper torque ensures a leak-free connection and proper fuel delivery.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Proper torque ensures a secure connection to the fuel rail and proper fuel injection.
Fuel Filler And Filter Components
1 Fuel Filler Neck Bolts
M10 x 1.5
1
Fuel Filler Neck Bolts
M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque ensures a leak-free connection and proper fueling.
2 Fuel Filter Bolt/Nut
M12 x 1.75
2
Fuel Filter Bolt/Nut
M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque ensures a leak-free connection and proper fuel filtration.
Electrical Components
1 Fuel Injector Electrical Connector Bolts (Estimated)
M5 x 0.8
1
Fuel Injector Electrical Connector Bolts (Estimated)
M5 x 0.8
Torque Specification
7.5 in-lbs (0.85 N·m)
Important Notes
Estimated torque value, may vary depending on manufacturer's recommendations.
2 Fuel Pump Electrical Connector Bolts (Estimated)
M5 x 0.8
2
Fuel Pump Electrical Connector Bolts (Estimated)
M5 x 0.8
Torque Specification
7.5 in-lbs (0.85 N·m)
Important Notes
Estimated torque value, may vary depending on manufacturer's recommendations.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
AC Compressor
1 A/C Compressor Mounting Bolts
M12 x 1.5
1
A/C Compressor Mounting Bolts
M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
AC Lines And Fittings
1 A/C Line Fittings
M10 x 1.25
1
A/C Line Fittings
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
2 A/C Refrigerant Line Clamp Bolts
M8 x 1.0
2
A/C Refrigerant Line Clamp Bolts
M8 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, consult manufacturer's recommendations for specific torque value.
AC Condenser
1 A/C Condenser Mounting Bolts
M10 x 1.25
1
A/C Condenser Mounting Bolts
M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value, consult manufacturer's recommendations for specific torque value.
AC Evaporator
1 A/C Evaporator Mounting Bolts
M8 x 1.0
1
A/C Evaporator Mounting Bolts
M8 x 1.0
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value, consult manufacturer's recommendations for specific torque value.
Heater Core
1 Heater Core Mounting Bolts
M8 x 1.0
1
Heater Core Mounting Bolts
M8 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, consult manufacturer's recommendations for specific torque value.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
148 ft-lbs (200 N·m)
Important Notes
Proper torque is crucial to prevent damage to the strut/shock absorber and maintain ride quality.
2 Control Arm Bolts
M12 x 1.25
2
Control Arm Bolts
M12 x 1.25
Torque Specification
111 ft-lbs (150 N·m)
Important Notes
Incorrect torque can lead to uneven tire wear and compromised handling.
3 Ball Joint Nut
M16 x 1.5
3
Ball Joint Nut
M16 x 1.5
Torque Specification
46 ft-lbs (63 N·m)
Important Notes
Proper torque ensures the joint remains secure and prevents wear on surrounding components.
4 Tie Rod End Nut
M14 x 1.5
4
Tie Rod End Nut
M14 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Correct torque is essential for stable steering and handling.
Rear Suspension
1 Upper Control Arm Bushing Bolts
M10 x 1.25
1
Upper Control Arm Bushing Bolts
M10 x 1.25
Torque Specification
1. 70 ft-lbs (95 N·m)
2. 80 ft-lbs (110 N·m)
Important Notes
Estimated torque range based on general industry standards. Consult manufacturer's recommendations or a trusted repair manual for accurate information.
2 Lower Control Arm Bolts
M12 x 1.25
2
Lower Control Arm Bolts
M12 x 1.25
Torque Specification
1. 90 ft-lbs (120 N·m)
2. 100 ft-lbs (135 N·m)
Important Notes
Estimated torque range based on general industry standards. Consult manufacturer's recommendations or a trusted repair manual for accurate information.
3 Stabilizer Bar Mounting Bolts
M10 x 1.25
3
Stabilizer Bar Mounting Bolts
M10 x 1.25
Torque Specification
1. 40 ft-lbs (55 N·m)
2. 50 ft-lbs (67 N·m)
Important Notes
Estimated torque range based on general industry standards. Consult manufacturer's recommendations or a trusted repair manual for accurate information.
Steering System
1 Steering Gear/Rack Bolts
M14 x 1.5
1
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
133 ft-lbs (180 N·m)
Important Notes
Correct torque is critical for maintaining proper steering alignment and feel.
U341e Transmission
Torque specifications for U341e Transmission
U341e Transmission
Torque specifications for U341e Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
39 ft-lbs (53 N·m)
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
71 in-lbs (8 N·m)
Important Notes
Note: The torque value is specified in inch-lbs, which is equivalent to 8 Nm.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
2 Transmission Fluid Drain/Fill Plug
M14 x 1.5
2
Transmission Fluid Drain/Fill Plug
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Transmission Bellhousing
1 Transmission Bellhousing Bolts
M14 x 1.5
1
Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
1. 55 ft-lbs (75 N·m)
2. 65 ft-lbs (88 N·m)
Important Notes
Note: The torque value is estimated based on industry standards for similar transmissions.
Transmission Crossmember
1 Transmission Crossmember Bolts
M16 x 1.5
1
Transmission Crossmember Bolts
M16 x 1.5
Torque Specification
1. 70 ft-lbs (95 N·m)
2. 80 ft-lbs (108 N·m)
Important Notes
Note: The torque value is estimated based on industry standards for similar transmissions.
Torque Converter
1 Torque Converter Bolts
M10 x 1.25
1
Torque Converter Bolts
M10 x 1.25
Torque Specification
1. 30 ft-lbs (41 N·m)
2. 40 ft-lbs (54 N·m)
Important Notes
Note: The torque value is estimated based on industry standards for similar transmissions.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the recommended torque for the lug nuts on a 2008-2010 Pontiac Vibe?
Q1
What IS the recommended torque for the lug nuts on a 2008-2010 Pontiac Vibe?
The recommended torque for the lug nuts on a 2008-2010 Pontiac Vibe IS 100 ft-lbs (136 Nm).
Q2 What IS the recommended torque for the oil drain plug on a 2008-2010 Pontiac Vibe?
Q2
What IS the recommended torque for the oil drain plug on a 2008-2010 Pontiac Vibe?
The recommended torque for the oil drain plug on a 2008-2010 Pontiac Vibe IS 25 ft-lbs (34 Nm).
Q3 What IS the recommended torque for the spark plugs on a 2008-2010 Pontiac Vibe?
Q3
What IS the recommended torque for the spark plugs on a 2008-2010 Pontiac Vibe?
The recommended torque for the spark plugs on a 2008-2010 Pontiac Vibe IS 20 ft-lbs (27 Nm).
Q4 What IS the recommended torque for the brake caliper bolts on a 2008-2010 Pontiac Vibe?
Q4
What IS the recommended torque for the brake caliper bolts on a 2008-2010 Pontiac Vibe?
The recommended torque for the brake caliper bolts on a 2008-2010 Pontiac Vibe IS 120 ft-lbs (163 Nm).
Q5 What IS the recommended torque for the steering rack bolts on a 2008-2010 Pontiac Vibe?
Q5
What IS the recommended torque for the steering rack bolts on a 2008-2010 Pontiac Vibe?
The recommended torque for the steering rack bolts on a 2008-2010 Pontiac Vibe IS 90 ft-lbs (122 Nm).
Q6 What IS the recommended torque for the suspension bolts on a 2008-2010 Pontiac Vibe?
Q6
What IS the recommended torque for the suspension bolts on a 2008-2010 Pontiac Vibe?
The recommended torque for the suspension bolts on a 2008-2010 Pontiac Vibe IS 150 ft-lbs (203 Nm).
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the vibe.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Technical Service Bulletins
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.